Replacement clock CMOS battery for Nintendo GameCube CR2032-VBY2 | ZedLabz
- Replacement CR2032 solder-in battery for GameCube consoles
- Uses a compatible CR2032-VBY2 style cell with correct leg spacing
- Thinner solder tabs than original but fully compatible once installed
- Solders to the controller port PCB – installation requires soldering
- Includes 1 replacement battery per pack
This replacement CR2032 solder-in battery is designed for the Nintendo GameCube, providing a compatible alternative to the factory-fitted CMOS battery responsible for maintaining the internal clock and system settings. It uses a CR2032-VBY2 style lithium cell with solder tabs suited for GameCube installation.
The included battery features slightly thinner metal tabs than the original Nintendo part, but the spacing / alignment is correct, ensuring full compatibility when soldered in place. This makes it a practical solution for restoring proper save-time and system clock functionality to consoles with depleted or ageing batteries.
The battery must be soldered directly to the controller port PCB board inside the GameCube. One battery is supplied per pack, pre-tabbed and ready for installation.
Please take note of the polarity when installing, the positive + symbol is shown on the controller port board inside the console.
- Battery type: CR2032 lithium coin cell with solder tabs
- Replacement for original GameCube soldered CMOS battery
- Compatible with all Nintendo GameCube models
- Tabs are narrower than stock but function identically once installed
- Requires soldering to the controller port PCB
- Includes 1× battery
Q: Do I need to solder this into the console?
Yes. The GameCube uses a soldered battery and this replacement must be soldered to the controller port PCB.
Q: Are the tabs the same as the original?
They are slightly thinner than the original Nintendo tabs, but they fit correctly and work as intended once soldered.
Q: Is this compatible with all GameCube models?
Yes. It works with all regional variants and hardware revisions of the Nintendo GameCube.
Q: What does this battery power?
It maintains the GameCube’s internal clock and some system settings when the console is unplugged.
Warning: KEEP OUT OF REACH OF CHILDREN - Swallowing a coin cell can cause serious injury or death if swallowed, seek immediate medical attention
- Contains a coin-cell battery – keep out of reach of children
- Do not crush, puncture or expose the battery to excessive heat
- Dispose of used batteries at an approved recycling point
- Installation should be carried out by someone familiar with soldering
All trademarks are the property of their respective owners and are used for compatibility reference only.
More Images
Replacement clock CMOS battery for Nintendo GameCube CR2032-VBY2 | ZedLabz
- Replacement CR2032 solder-in battery for GameCube consoles
- Uses a compatible CR2032-VBY2 style cell with correct leg spacing
- Thinner solder tabs than original but fully compatible once installed
- Solders to the controller port PCB – installation requires soldering
- Includes 1 replacement battery per pack
This replacement CR2032 solder-in battery is designed for the Nintendo GameCube, providing a compatible alternative to the factory-fitted CMOS battery responsible for maintaining the internal clock and system settings. It uses a CR2032-VBY2 style lithium cell with solder tabs suited for GameCube installation.
The included battery features slightly thinner metal tabs than the original Nintendo part, but the spacing / alignment is correct, ensuring full compatibility when soldered in place. This makes it a practical solution for restoring proper save-time and system clock functionality to consoles with depleted or ageing batteries.
The battery must be soldered directly to the controller port PCB board inside the GameCube. One battery is supplied per pack, pre-tabbed and ready for installation.
Please take note of the polarity when installing, the positive + symbol is shown on the controller port board inside the console.
- Battery type: CR2032 lithium coin cell with solder tabs
- Replacement for original GameCube soldered CMOS battery
- Compatible with all Nintendo GameCube models
- Tabs are narrower than stock but function identically once installed
- Requires soldering to the controller port PCB
- Includes 1× battery
Q: Do I need to solder this into the console?
Yes. The GameCube uses a soldered battery and this replacement must be soldered to the controller port PCB.
Q: Are the tabs the same as the original?
They are slightly thinner than the original Nintendo tabs, but they fit correctly and work as intended once soldered.
Q: Is this compatible with all GameCube models?
Yes. It works with all regional variants and hardware revisions of the Nintendo GameCube.
Q: What does this battery power?
It maintains the GameCube’s internal clock and some system settings when the console is unplugged.
Warning: KEEP OUT OF REACH OF CHILDREN - Swallowing a coin cell can cause serious injury or death if swallowed, seek immediate medical attention
- Contains a coin-cell battery – keep out of reach of children
- Do not crush, puncture or expose the battery to excessive heat
- Dispose of used batteries at an approved recycling point
- Installation should be carried out by someone familiar with soldering
All trademarks are the property of their respective owners and are used for compatibility reference only.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- Replacement CR2032 solder-in battery for GameCube consoles
- Uses a compatible CR2032-VBY2 style cell with correct leg spacing
- Thinner solder tabs than original but fully compatible once installed
- Solders to the controller port PCB – installation requires soldering
- Includes 1 replacement battery per pack
This replacement CR2032 solder-in battery is designed for the Nintendo GameCube, providing a compatible alternative to the factory-fitted CMOS battery responsible for maintaining the internal clock and system settings. It uses a CR2032-VBY2 style lithium cell with solder tabs suited for GameCube installation.
The included battery features slightly thinner metal tabs than the original Nintendo part, but the spacing / alignment is correct, ensuring full compatibility when soldered in place. This makes it a practical solution for restoring proper save-time and system clock functionality to consoles with depleted or ageing batteries.
The battery must be soldered directly to the controller port PCB board inside the GameCube. One battery is supplied per pack, pre-tabbed and ready for installation.
Please take note of the polarity when installing, the positive + symbol is shown on the controller port board inside the console.
- Battery type: CR2032 lithium coin cell with solder tabs
- Replacement for original GameCube soldered CMOS battery
- Compatible with all Nintendo GameCube models
- Tabs are narrower than stock but function identically once installed
- Requires soldering to the controller port PCB
- Includes 1× battery
Q: Do I need to solder this into the console?
Yes. The GameCube uses a soldered battery and this replacement must be soldered to the controller port PCB.
Q: Are the tabs the same as the original?
They are slightly thinner than the original Nintendo tabs, but they fit correctly and work as intended once soldered.
Q: Is this compatible with all GameCube models?
Yes. It works with all regional variants and hardware revisions of the Nintendo GameCube.
Q: What does this battery power?
It maintains the GameCube’s internal clock and some system settings when the console is unplugged.
Warning: KEEP OUT OF REACH OF CHILDREN - Swallowing a coin cell can cause serious injury or death if swallowed, seek immediate medical attention
- Contains a coin-cell battery – keep out of reach of children
- Do not crush, puncture or expose the battery to excessive heat
- Dispose of used batteries at an approved recycling point
- Installation should be carried out by someone familiar with soldering
All trademarks are the property of their respective owners and are used for compatibility reference only.
