USB C Power supply replacement for Nintendo GameCube console PSU power board | Robot retro
Features:
- Drop-in USB-C PSU Replacement - simply install and play.
- Universal Compatibility - Works with all regions
- Compatible with various mods such as ODE & HDMI mods
- Compatible with many 30W USB C power supplies (not included)
- Includes rear spacer in black, other colours available seperately.
Description:
Bring new life to your original Nintendo GameCube with this elegant, solder-free USB-C power board from RobotRetro.
Designed as a sleek and safe replacement, it modernises your console’s power delivery while preserving the authentic gaming experience.
The board installs with simple plug-and-play fitting – no soldering required.
Compatible with all regional GameCube models (PAL, NTSC, and Japanese).
It also works seamlessly with popular upgrades such as optical drive emulators (ODEs), HDMI mods, and other performance accessories that benefit from stable, modern power delivery.
What Sets the robot_retro Power Board Apart:
Powered by USB-C PD (Power Delivery) - Compatible with 12V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell & uGreen.
Recommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.
Drop in plug and play - No soldering or wiring required—simply install and play.
Universal Compatibility - Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Install rear spacer included - Comes with a black 3D-printed spacer. Additional colours available to purchase or print via downloadable STL files.
Installation Instructions
Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver). See photo.
Remove the top lid and unscrew the single power board screw (phillips head). See photo.
Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
Fit the robot_retro board in the same position as the original and replace the power board screw.
Reassemble your console.
- Drop-in USB-C PSU Replacement - simply install and play.
- Universal Compatibility - Works with all regions
- Compatible with various mods such as ODE & HDMI mods
- Compatible with many 30W USB C power supplies (not included)
- Includes rear spacer in black, other colours available seperately.
Bring new life to your original Nintendo GameCube with this elegant, solder-free USB-C power board from RobotRetro.
Designed as a sleek and safe replacement, it modernises your console’s power delivery while preserving the authentic gaming experience.
The board installs with simple plug-and-play fitting – no soldering required.
Compatible with all regional GameCube models (PAL, NTSC, and Japanese).
It also works seamlessly with popular upgrades such as optical drive emulators (ODEs), HDMI mods, and other performance accessories that benefit from stable, modern power delivery.
What Sets the robot_retro Power Board Apart:
Powered by USB-C PD (Power Delivery) - Compatible with 12V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell & uGreen.
Recommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.
Drop in plug and play - No soldering or wiring required—simply install and play.
Universal Compatibility - Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Install rear spacer included - Comes with a black 3D-printed spacer. Additional colours available to purchase or print via downloadable STL files.
Installation Instructions
Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver). See photo.
Remove the top lid and unscrew the single power board screw (phillips head). See photo.
Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
Fit the robot_retro board in the same position as the original and replace the power board screw.
Reassemble your console.
$1,926.18
USB C Power supply replacement for Nintendo GameCube console PSU power board | Robot retro—
$1,926.18
More Images
USB C Power supply replacement for Nintendo GameCube console PSU power board | Robot retro
Features:
- Drop-in USB-C PSU Replacement - simply install and play.
- Universal Compatibility - Works with all regions
- Compatible with various mods such as ODE & HDMI mods
- Compatible with many 30W USB C power supplies (not included)
- Includes rear spacer in black, other colours available seperately.
Description:
Bring new life to your original Nintendo GameCube with this elegant, solder-free USB-C power board from RobotRetro.
Designed as a sleek and safe replacement, it modernises your console’s power delivery while preserving the authentic gaming experience.
The board installs with simple plug-and-play fitting – no soldering required.
Compatible with all regional GameCube models (PAL, NTSC, and Japanese).
It also works seamlessly with popular upgrades such as optical drive emulators (ODEs), HDMI mods, and other performance accessories that benefit from stable, modern power delivery.
What Sets the robot_retro Power Board Apart:
Powered by USB-C PD (Power Delivery) - Compatible with 12V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell & uGreen.
Recommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.
Drop in plug and play - No soldering or wiring required—simply install and play.
Universal Compatibility - Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Install rear spacer included - Comes with a black 3D-printed spacer. Additional colours available to purchase or print via downloadable STL files.
Installation Instructions
Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver). See photo.
Remove the top lid and unscrew the single power board screw (phillips head). See photo.
Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
Fit the robot_retro board in the same position as the original and replace the power board screw.
Reassemble your console.
- Drop-in USB-C PSU Replacement - simply install and play.
- Universal Compatibility - Works with all regions
- Compatible with various mods such as ODE & HDMI mods
- Compatible with many 30W USB C power supplies (not included)
- Includes rear spacer in black, other colours available seperately.
Bring new life to your original Nintendo GameCube with this elegant, solder-free USB-C power board from RobotRetro.
Designed as a sleek and safe replacement, it modernises your console’s power delivery while preserving the authentic gaming experience.
The board installs with simple plug-and-play fitting – no soldering required.
Compatible with all regional GameCube models (PAL, NTSC, and Japanese).
It also works seamlessly with popular upgrades such as optical drive emulators (ODEs), HDMI mods, and other performance accessories that benefit from stable, modern power delivery.
What Sets the robot_retro Power Board Apart:
Powered by USB-C PD (Power Delivery) - Compatible with 12V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell & uGreen.
Recommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.
Drop in plug and play - No soldering or wiring required—simply install and play.
Universal Compatibility - Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Install rear spacer included - Comes with a black 3D-printed spacer. Additional colours available to purchase or print via downloadable STL files.
Installation Instructions
Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver). See photo.
Remove the top lid and unscrew the single power board screw (phillips head). See photo.
Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
Fit the robot_retro board in the same position as the original and replace the power board screw.
Reassemble your console.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Features:
- Drop-in USB-C PSU Replacement - simply install and play.
- Universal Compatibility - Works with all regions
- Compatible with various mods such as ODE & HDMI mods
- Compatible with many 30W USB C power supplies (not included)
- Includes rear spacer in black, other colours available seperately.
Description:
Bring new life to your original Nintendo GameCube with this elegant, solder-free USB-C power board from RobotRetro.
Designed as a sleek and safe replacement, it modernises your console’s power delivery while preserving the authentic gaming experience.
The board installs with simple plug-and-play fitting – no soldering required.
Compatible with all regional GameCube models (PAL, NTSC, and Japanese).
It also works seamlessly with popular upgrades such as optical drive emulators (ODEs), HDMI mods, and other performance accessories that benefit from stable, modern power delivery.
What Sets the robot_retro Power Board Apart:
Powered by USB-C PD (Power Delivery) - Compatible with 12V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell & uGreen.
Recommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.
Drop in plug and play - No soldering or wiring required—simply install and play.
Universal Compatibility - Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Install rear spacer included - Comes with a black 3D-printed spacer. Additional colours available to purchase or print via downloadable STL files.
Installation Instructions
Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver). See photo.
Remove the top lid and unscrew the single power board screw (phillips head). See photo.
Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
Fit the robot_retro board in the same position as the original and replace the power board screw.
Reassemble your console.
- Drop-in USB-C PSU Replacement - simply install and play.
- Universal Compatibility - Works with all regions
- Compatible with various mods such as ODE & HDMI mods
- Compatible with many 30W USB C power supplies (not included)
- Includes rear spacer in black, other colours available seperately.
Bring new life to your original Nintendo GameCube with this elegant, solder-free USB-C power board from RobotRetro.
Designed as a sleek and safe replacement, it modernises your console’s power delivery while preserving the authentic gaming experience.
The board installs with simple plug-and-play fitting – no soldering required.
Compatible with all regional GameCube models (PAL, NTSC, and Japanese).
It also works seamlessly with popular upgrades such as optical drive emulators (ODEs), HDMI mods, and other performance accessories that benefit from stable, modern power delivery.
What Sets the robot_retro Power Board Apart:
Powered by USB-C PD (Power Delivery) - Compatible with 12V PD chargers. Most 30W USB-C adapters will work, including models from Anker, Dell & uGreen.
Recommended: uGreen Nexode Mini 30W or Nintendo Switch Power Supply for optimal quality and value.
Drop in plug and play - No soldering or wiring required—simply install and play.
Universal Compatibility - Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Install rear spacer included - Comes with a black 3D-printed spacer. Additional colours available to purchase or print via downloadable STL files.
Installation Instructions
Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver). See photo.
Remove the top lid and unscrew the single power board screw (phillips head). See photo.
Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
Fit the robot_retro board in the same position as the original and replace the power board screw.
Reassemble your console.
